Revolving Truck – Small Proportioned for use on flagpoles up to 35′ with a top diameter of up to 3 1/2″. Of heavy cast construction, this truck is available in two styles in order to be used in different applications. The standard unit has integrally cast upper and lower bearing races with 25 stainless steel ball bearings. A heavy duty version uses upper and lower stainless steel, sealed lubricant bearing assemblies for longer life and greater ease of rotation. Both models are available for use with cable or can be used in halyard applications with the addition of a hard rubber grommet at the cable exit hole. Assembly is 5 3/4″ in height and 5 3/4″ in diameter. The cast aluminum spindle is threaded 1 1/4″NPT and the top of the truck is threaded 1/2″-13NC to accept a finial.
Revolving Truck – Large The Large internal halyard units are of heavy cast aluminum construction with a bronze brushing at the cable exit point. These trucks incorporate upper and lower stainless steel, sealed lubricant bearing assemblies. The Large Truck has a base diameter of 8″. Tops are tapped 1/2″-13NC for the attachment of a final. The standard cast aluminum spindle on each unit is threaded 1 1/4″NPT
Cast Ball/Truck Combination The Cast Ball/Truck Combination gives a very pleasing top appearance to any flagpole. Of aluminum construction, these units utilize stainless steels, sealed lubricant bearing assemblies for longer life and greater ease of rotation, internally mounted stainless steel pulley block and bronze cable bushings, the unit is 12″ in diameter. The spindle is of machined cast aluminum with 1 1/4″NPT threads.
There are many different choices for the truck assemblies, please contact our office @ 214-596-1900 with any questions or to go over the options.